Connecting the CORE sensor to iGPSport bike computers
Overview
iGPSPORT bike computers allow to pair your CORE sensor like any other sensor. Once it is set up, it will connect automatically before your next ride (ANT+). The bike computer will record data in real-time and save it to a FIT file.
Compatibility
The compatible iGPSPORT bike computer models and software versions:
BiNavi V1.12(2025/05/08)
iGS800 V1.57( 2025/06/10)
Connection to bike computer
STEP 1 - Pair the CORE sensor
1. Swipe down on the homepage and tap the sensor entry.
2. Go to the sensor page, select CORE, and start searching for nearby sensors (ANT+ only).
3. Once found, tap to connect and complete the pairing.
The CORE sensor, like any other sensor, will connect automatically after the first pairing.
STEP 2 - Set Up the Data Fields
1. Tap the homepage entry or the bottom-right button to enter the ride data page.
2. On the ride data page, long press to enter edit mode, where you can modify the page template and adjust data fields.
The available fields to add are:
l CORE Temp
l Avg Core Temp
l Max Core Temp
l Min Core Temp
l Lap Avg Core Temp
l Lap Max Core Temp
l Lap Min Core Temp
l Core Body Temp Graph
Step 3 - Alert Settings
Enter ride mode from the system menu, select alert settings, and set the minimum and maximum temperature alerts for the CORE sensor.
NOTE: the values below are for illustration only and no real physiological values
Step 4 - Enjoy the ride
All your CORE Data will be saved in the fit-file for post training analysis.